3HP Rotary Phase ConverterAB03
Idler Generator
- Designed and engineered for phase conversion
- Achieve optimum voltage and current balance throughout the full load of the converter
- Awarded a Soft Start rating by drastically reducing inrush current upon startup.
- Run cool, quietly, and efficiently at synchronous speed indefinitely.
- Manufactured in the USA by Baldor Electric
Control Panel
- Push-Button ON/OFF Switch w/ PowerGuard Protection
- Heavy Duty Performance, 100% Power
- Powder-Coated Steel Enclosure
- Integrated protection in case of power interruption
- Removable sides for easy access to wiring
- Stress-free component mounts prevent leakage
- Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
- Copper windings with ISR magnet wire
- Best Warranty in the Industry
PLEASE NOTE:
ALL prices shown below reflect the promotional discount.
List Price: $542 (base unit).
Sale Price: as shown.
Build It
$352.00
Specifications
- Cost to Operate: $.01/hr
- Starts/Runs Easy Loads up to 3HP such as drills, chop saws, bench grinders, wheel balancers, etc.
- Starts/Runs Medium Loads up to 2HP such as larger chops saws, drills, presses, mills, mixers, etc.
- Starts/Runs Large Loads up to 1.5HP such as lathes, sanders, pizza/bagel dough mixers, etc.
- Largest HP motor to start: 2.5HP
- Maximum total HP to run (non CNC): 4.5HP, 13 amps
- Maximum total HP to run (CNC): 1.5HP, 4 amps
Idler Generator
Control Panel
Sizing Help
Determine the load type of the application, and then consult the chart below. Please call us toll free at 1-888-743-6832 for sizing assistance and/or a professional recommendation.
- Easy - no flywheel, clutch, little resistance/inertia, 1-2 times full load current upon start-up
- Medium- machine inertia, medium resistance, 3-4 times full load current upon start-up
- Hard - flywheel, no clutch, starts against load, 5-6 times, or locked rotor current upon start-up
- Very Hard- elevator, hydraulic pump, equipment under continuous load etc
- Frequent Start- instant reversing, heavy running loads
- CNC - turning centers, PLC's, EDM, CNC machining
- Resistive - heaters, transformers, welders, power supplies etc.
| Rotary Phase Converter | Largest HP Motor Load | Maximum CNC Load | Max Total Load Combined Equip† | Operating Cost‡ | ||||||
| HP | kW | Easy | Med | Hard | Amps | kW | HP* | Amps | kW | ($ per/hr) |
| 3 | 2.2 | 2 | 2 | 1.5 | 0-5 | 0-1.5 | 1.5 | 9 | 2.7 | $.01 |
| 5 | 3.7 | 3 | 3 | 2 | 0-8 | 0-2.4 | 2.5 | 15 | 4.5 | $.015 |
| 7.5 | 5.6 | 5 | 5 | 3 | 0-11 | 0-3.3 | 3.75 | 22 | 6.6 | $.02 |
| 10 | 7.4 | 7.5 | 6 | 5 | 0-15 | 0-4.5 | 5 | 28 | 8.4 | $.03 |
| 15 | 11.2 | 10 | 10 | 7.5 | 0-20 | 0-6 | 7.5 | 42 | 12.6 | $.045 |
| 20 | 14.9 | 15 | 12 | 10 | 0-25 | 0-7.5 | 10 | 54 | 16.2 | $.06 |
| 25 | 18.6 | 20 | 15 | 10 | 0-30 | 0-9 | 12.5 | 68 | 20.4 | $.07 |
| 30 | 22.4 | 25 | 20 | 15 | 0-42 | 0-12.6 | 15 | 80 | 24.0 | $.09 |
| 40 | 29.8 | 30 | 25 | 20 | 0-55 | 0-16.5 | 20 | 104 | 31.2 | $.12 |
| 50 | 37.3 | 40 | 35 | 25 | 0-70 | 0-21 | 25 | 126 | 37.8 | $.15 |
| 60 | 44.7 | 50 | 40 | 30 | 0-80 | 0-24 | 30 | 150 | 45.0 | $.18 |
| 80 | 58.7 | 60 | 50 | 40 | 0-110 | 0-33 | 40 | 208 | 62.4 | $.24 |
| 100 | 73.3 | 80 | 70 | 50 | 0-140 | 0-42 | 50 | 252 | 75.6 | $.30 |
| 120 | 88.0 | 100 | 80 | 60 | 0-160 | 0-48 | 60 | 300 | 90.0 | $.36 |
| * total spindle horsepower: total kW of the machine must be less than max CNC load kW. | ||||||||||
| † combined loads do not include CNC or voltage sensitive loads. | ||||||||||
| ‡ cost based on national average of $.10/kWhr. | ||||||||||
Dimensions
dimensions
