Hot Shot 360 Duplex – 240v

Industry Leading Mechanical Design

Hot Shot Oven & Kilns are equipped with Cool-Touch Technology that provide a safe external temperature to allow for safer operation and protection of its surroundings. Each oven comes with a removable high density kiln floor. This is ideal to assist with project setup or if it needs to be replaced. It is built with a high-quality 304 stainless-steel core construction with a fan cooled external powder coated enclosure. It features a dual layer air plenum for external heat management and precise temperature control.

Cutting Edge Performance

Hot Shot 360D double decked heat treating and tempering oven high-efficiency technology allows you to reach the maximum temperatures:

Upper Oven - 2000 degree F / 1093 Degrees C
Lower Oven - 600 degree F / 316 Degrees C

with use of the on-screen controller. This unit is equipped with a kiln type “K” thermocouple and 16AWG Kanthal A-1 heating element.

Each piece of insulation is routered to fit perfectly together. This allows for the oven to maintain the temperature perfectly and not fluctuate due to gaps or poor fit. Each piece is routered to fit the heating element perfectly, so it has a snug fit. Each oven comes with a removable high density kiln floor. This is ideal to assist with project setup or if it needs to be replaced.

Programmable Alarm

Each unit comes standard with an integrated alarm that can be set to alert the user when a desired point or temperature is reached in the program.
We also have integrated a safety door switch that will de-energize the heating element when the door is open.

Side Opening Door with Cool Touch Handle

When using a heat-treating/tempering oven, it entails removing very hot material from the core to go to its next phase of the process. We designed this oven to have a side opening door that can open far enough to not be in the way. The handle is designed for a one-handed operation for easy and quick removal of the material. Safety is our key concern and with the cool touch handle made from high-quality stainless steel and a door that opens completely out of the way, it keeps the customer safe.

Upper Novus Controller

The 360D has two controllers designed for each ovens needs. The upper unit is the Heat Treating Oven which uses the Novus 480D Programming Controller. This controller allows you to program and ramp to any temperature up to 2000°F/1093°C.

Lower Novus Controller

The 360D has two controllers designed for each ovens needs. The bottom unit is the Tempering Oven which uses the Novus 1030T PID Process Controller. This is a timer / temperature controller, it can be set and hold temperatures up to 600°F/315°C.

Made in the USA

Each Hot Shot Oven is manufactured and tested at Hot Shot Oven & Kilns research and development facility located in West Bend, WI.

Relay

Unlike many other ovens & kilns all Hot Shot ovens come standard with a solid state relay. Having a solid state relay eliminates the distractive clicking noise that a mechanical relay makes. A solid state relay is also more dependable and provides a longer life expectancy than that of a mechanical relay.